Parameters |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
75mOhm |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Base Part Number |
TPS2012 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
1A |
Operating Supply Voltage |
5.5V |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Nominal Supply Current |
73μA |
Output Configuration |
High Side |
Output Current |
1A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
73μA |
Adjustable Threshold |
NO |
Quiescent Current |
73μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Min Current Limit |
1.1A |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Rds On (Typ) |
75m Ω |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2012DRG4 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package includes it.The mounting type of the LED driver is Surface Mount.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.As a default, the output is set to 1.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The TPS2012 family contains this object.In total, there are 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.It has 1 functions.In order to meet the operation criteria, the maximum output current drops to 1A.Using a voltage of 3V allows for high efficiency.There are 8 pins in total on this board.In this LED driving board, there is 75mOhm resistance.This case results in a 1A output current.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.It has a maximum input voltage of 5.5V volts.It has a 2.7V volt minimum input voltage.It requires 73μA current to operate.
TPS2012DRG4 Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2012DRG4 Applications
There are a lot of Texas Instruments TPS2012DRG4 Power Switches ICs applications.
- Hot Swap
- HDD, SSD
- Handheld Devices
- Hot-Swap Systems
- Notebook and Tablet Computers
- Low Voltage I/O System Power
- Hard Disk Drives
- Storage (HDDs, SSDs)
- PDAs
- Wireless/Networking Cards