TPS2013AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2013 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 1.65A |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 33m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2013AD Overview
It is packaged in the manner of a Tube.This package is included in 8-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.To operate, it needs a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.It belongs to the family TPS2013.It has a total of 8 terminations.For operation, we use the 8 pins.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 1.5A when operation criteria are met.As long as the supply voltage is 3.3V, high efficiency can be achieved.The LED driving board is equipped with a total of 8 pins.In this case, there is 30mOhm resistance in the LED driving board.This results in a 1.5A output current.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.In order to maximize efficiency, the supply voltage should be set at 5.5V.A maximum input voltage of 5.5V volts can be applied to it.Input voltage must be at least 2.7V volts.A maximum current requirement of 73μA is required for its operation.It has 1 inputs.
TPS2013AD Features
Supplied from 3.3V
Resistance of 30mOhm
1 channels
TPS2013AD Applications
There are a lot of Texas Instruments TPS2013AD Power Switches ICs applications.
- HDD and SSD
- USB Protection
- Wearable Devices
- Hard Disk Drives
- Smart Phones, Feature Phones
- Telecom and Network Systems
- Solid-State Drives
- Gaming
- Handheld Devices
- USB Ports/Hubs
