banner_page

TPS2013ADR

N-Channel Gold PMIC TPS2013 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2013ADR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 973
  • Description: N-Channel Gold PMIC TPS2013 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Max Supply Current 73μA
Adjustable Threshold NO
Quiescent Current 73μA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 2.7V
Number of Inputs 1
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Min Current Limit 1.65A
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ) 33m Ω
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 30mOhm
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number TPS2013
Pin Count 8
Output Type N-Channel
Max Output Current 1.5A
Operating Supply Voltage 5.5V
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Nominal Supply Current 73μA
Output Configuration High Side
Output Current 1.5A
Voltage - Supply (Vcc/Vdd) Not Required

TPS2013ADR Overview


The package is in the form of a Tape & Reel (TR).Package 8-SOIC (0.154, 3.90mm Width) contains it.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts has been specified.I believe it belongs to the TPS2013 family.It has a total of 8 terminations.8 pins are used for operation.The LED driver has 1 functions.As a result, the maximum output current is reduced to 1.5A in order to meet the operation requirements.With a supply voltage of 3.3V, high efficiency is possible.This LED driver is equipped with a total of 8 pins.Currently, the LED driving board has a resistance of 30mOhm ohms.This case has the output current set to 1.5A.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.Input voltage is limited to 5.5V volts.The input voltage minimum is 2.7V volts.It has a maximum current requirement of 73μA.1 inputs are available.

TPS2013ADR Features


Supplied from 3.3V
Resistance of 30mOhm
1 channels

TPS2013ADR Applications


There are a lot of Texas Instruments TPS2013ADR Power Switches ICs applications.

  • Portable Video Game Players
  • USB Power Distribution
  • Hard Disk Drives
  • Storage (HDDs, SSDs)
  • Portable GPS
  • Portable/Handheld Devices
  • USB Ports/Hubs
  • USB Protection
  • Hot Swaps
  • Wireless Headsets

Write a review

Note: HTML is not translated!
    Bad           Good