TPS2013APWP
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2013 |
| Pin Count | 14 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 33m Ω |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
TPS2013APWP Overview
Tube is how it's packaged.Package 14-PowerTSSOP (0.173, 4.40mm Width) contains it.A Surface Mount mounting is used for the LED driving board.It owns General Purpose switch type.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There is a TPS2013 family of things that it belongs to.There are 14 terminations in it.The operation is performed through the 14 pins.The LED driver has 1 functions.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way of this LED driving board.As a result, it has a total of 14 pins.It has a resistance of 30mOhm.In this case, the output current will be set to 1.5A.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.The total number of channels is 1.In order to maximize efficiency, the supply voltage should be set to 5.5V.Voltage input is limited to 5.5V volts.The input voltage minimum is 2.7V volts.For its operation, a maximum current requirement of 73μA is required.Currently, there are 1 inputs available.
TPS2013APWP Features
Supplied from 3.3V
Resistance of 30mOhm
1 channels
TPS2013APWP Applications
There are a lot of Texas Instruments TPS2013APWP Power Switches ICs applications.
- Portable Music Players
- Notebook and Tablet Computers
- Various applications equipped with buttons
- Telecom and Network Systems
- Hot Swap
- Wireless/Networking Cards
- Solid-State Drives
- HDD and SSD
- Set-Top Boxes
- Notebook PC
