TPS2013APWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2013 |
| Pin Count | 14 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 33m Ω |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2013APWPR Overview
The LED driver's packaged as a Tape & Reel (TR).It is included in the package 14-PowerTSSOP (0.173, 4.40mm Width).The LED driver is mounted as Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.There is a TPS2013 family of things that it belongs to.It contains 14 terminations.During operation, the 14 pins are used.Currently, there are 1 functions associated with the lighting driver.To meet the operation criteria, the maximum output current drops to 1.5A.The supply voltage can be 3.3V for high efficiency.Surface Mount is mounted in the way of this LED driving board.In total, it has 14 pins.30mOhm is the resistance of the lighting driver.As a result, the output current is set to 1.5A.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.You can select from 1 channels.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.It has a maximum input voltage of 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.It requires a maximum current requirement of 73μA.With 1 inputs, it is equipped.
TPS2013APWPR Features
Supplied from 3.3V
Resistance of 30mOhm
1 channels
TPS2013APWPR Applications
There are a lot of Texas Instruments TPS2013APWPR Power Switches ICs applications.
- USB Ports/Hubs
- Wireless Headsets
- PDAs
- Wireless Modem Data Cards
- Portable/Handheld Devices
- HDD and SSD
- PC Card Hot Swap
- Gaming
- USB Protection
- HDD, SSD
