TPS2013D
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2013 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 1.65A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2013D Overview
The package is in the form of a Tube.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts has been specified.As you can see, it comes from the TPS2013 family.As a result, there are 8 terminations.The operation is carried out using the 8 pins.As far as functions are concerned, the lighting driver has 1.This operation requires the maximum output current to be decreased to 1.5A.High efficiency is possible at 3V supply voltage.As a result, it has a total of 8 pins.Currently, the LED driving board has a resistance of 75mOhm ohms.The output current is set to 1.5A in this case.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.There are a total of 1 available channels.A supply voltage of 5.5V is recommended for maximum efficiency.Voltage input is limited to 5.5V volts.As a minimum input voltage, it requires 2.7V volts.73μA is the maximum current required to operate it.
TPS2013D Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2013D Applications
There are a lot of Texas Instruments TPS2013D Power Switches ICs applications.
- Telecom and Network Systems
- Portable Video Game Players
- PDAs
- Hot Swap
- Low Voltage I/O System Power
- USB Power Distribution
- Storage (HDDs, SSDs)
- HDD and SSD
- Solid-State Drives
- Hot Swap
