TPS2013DG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2013 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 1.65A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2013DG4 Overview
It's?packaged?in?the way?of?a?Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.It produces a maximum output voltage of N-Channel volts at its maximum output.The TPS2013 family contains this object.It contains 8 terminations.In order to operate, 8 pins are used.Currently, the lighting driver has a total of 1 functions.Maximum output current falls to 1.5A when operation criteria are met.High efficiency is possible at 3V supply voltage.The LED driver has a total of 8 pins.Currently, the LED driving board has a resistance of 75mOhm ohms.In this case, the output current is set to 1.5A.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.In order to maximize efficiency, the supply voltage should be set at 5.5V.It has a maximum input voltage of 5.5V volts.Input voltage must be at least 2.7V volts.For its operation, a maximum current requirement of 73μA is required.
TPS2013DG4 Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2013DG4 Applications
There are a lot of Texas Instruments TPS2013DG4 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Handheld Devices
- Solid-State Drives
- Hot-Swap Systems
- PDAs
- Portable GPS
- Wireless Headsets
- Set-top-box
- Hot Swap
- USB Power Distribution
