TPS2013DRG4
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2013 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 1.65A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2013DRG4 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This package is included in 8-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type that it owns.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.It is part of the TPS2013 family of LED drivers.A total of 8 terminations have been found in it.In order to operate, 8 pins are used.Currently, the lighting driver has a total of 1 functions.The maximum output current must drop to 1.5A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 3V.8 pins are equipped with it.Currently, the LED driving board has a resistance of 75mOhm ohms.In this case, the output current is set to 1.5A.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 1.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.Its maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.7V volts.It has a maximum current requirement of 73μA.
TPS2013DRG4 Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2013DRG4 Applications
There are a lot of Texas Instruments TPS2013DRG4 Power Switches ICs applications.
- USB Power Distribution
- Telecom and Network Systems
- Hot Swap
- Wireless/Networking Cards
- Solid-State Drives
- Portable GPS
- Hot Swap
- Solid State Drivers
- Hot Swaps
- PC Card Hot Swap
