TPS2014D
| Parameters | |
|---|---|
| Switch Type | USB Switch |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 4.75V~5.25V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 95m Ω |
| Drain to Source Resistance | 75mOhm |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2014 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 7.3V |
| Output Type | N-Channel |
| Max Output Current | 600mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Output Configuration | High Side |
TPS2014D Overview
Tube is how it's packaged.Package 8-SOIC (0.154, 3.90mm Width) contains it.The mounting type of the LED driver is Surface Mount.USB Switch is the switch type it owns.It is recommended to set the temperature to 0°C~125°C TJ in order to ensure reliable operation.The LED driver is equipped with 1 outputs.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There are Status Flag features available on the LED driving board.It comes under the family of TPS2014.A total of 8 terminations have been found in it.In order to operate, 8 pins are used.It contains 1 functions.The maximum output current must drop to 600mA to meet the operation criteria.High efficiency is possible at 5V supply voltage.This lighting driver is mounted in the way of Surface Mount.There are 8 pins in total on this board.Currently, the LED driving board has a resistance of 75mOhm ohms.The maximum input voltage is 5.5V volts.It can handle a voltage of 5.5VV as its maximum supply voltage.It can also be used at 4Vvolts if needed.
TPS2014D Features
Supplied from 5V
Resistance of 75mOhm
TPS2014D Applications
There are a lot of Texas Instruments TPS2014D Power Switches ICs applications.
- Hot Swaps
- PC Cards
- HDD and SSD
- Notebook PC
- Wireless/Networking Cards
- Portable Music Players
- Set-Top Boxes
- Portable Video Game Players
- Hot-Swap Systems
- Portable GPS Device
