banner_page

TPS2014DR

N-Channel PMIC TPS2014 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2014DR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 949
  • Description: N-Channel PMIC TPS2014 8 Pin 5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TPS2014
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Interface On/Off
Max Supply Voltage 5.5V
Min Supply Voltage 4V
Current - Output (Max) 600mA
Output Configuration High Side
Switch Type USB Switch
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Input Characteristics STANDARD
Voltage - Load 4.75V~5.25V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature
Turn On Time 20000 µs
Output Peak Current Limit-Nom 1.2A
Rds On (Typ) 95m Ω
Drain to Source Resistance 75mOhm
Turn Off Time 40000 µs
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 72.603129mg
Operating Temperature 0°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Feature Status Flag
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99

TPS2014DR Overview


It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.Surface Mount is the mounting type of the LED driver.A USB Switch switch type is owned by it.It is recommended that the temperature be set to 0°C~125°C TJ for reliable performance.The LED driver has a total of 1 outputs.The maximum output voltage is N-Channel volts.A lighting driver with Status Flag features is available.It is part of the TPS2014 family of LED drivers.It contains 8 terminations.The operation is carried out using the 8 pins.It contains 1 functions.This LED driver has a maximum output of 600mAV.The supply voltage of 5V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.It is equipped with a total of 8 pins.A maximum supply voltage of 5.5VV can be handled by the LED driving board.You can also run it at 4V volts if required.

TPS2014DR Features


Supplied from 5V

TPS2014DR Applications


There are a lot of Texas Instruments TPS2014DR Power Switches ICs applications.

  • Hard Disk Drives
  • PC Cards
  • Hot Swaps
  • HDD, SSD
  • Portable Video Game Players
  • PDAs
  • Low Voltage I/O System Power
  • Wireless/Networking Cards
  • Smart Phones, Feature Phones
  • Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good