TPS2015DR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2015 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.75V~5.25V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 95m Ω |
| Drain to Source Resistance | 95mOhm |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2015DR Overview
It is package in Cut Tape (CT) case.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.The mounting type of the LED driver is Surface Mount.It owns USB Switch switch type.Ensure reliable operation by setting the temperature to 0°C~125°C TJ.The lighting driver has a total of 1 outputs that are available for use.Voltage output is N-Channel volts at maximum.Status Flag features are available on the lighting driver.The TPS2015 family consists of this type.In total, there are 8 terminations.8 pins are used for operation.There are 1 functions of the LED driver.In this case, the LED driving board can produce only 1AV as its maximum output.Using a voltage of 5V allows for high efficiency.The lighting driver is mounted in the direction of Surface Mount.A total of 8 pins are included in this LED driver.There is a maximum voltage of 5.5VV that it can handle.It is also capable of running at 4V volts if necessary.
TPS2015DR Features
Supplied from 5V
TPS2015DR Applications
There are a lot of Texas Instruments TPS2015DR Power Switches ICs applications.
- Portable Video Game Players
- Portable Devices
- Handheld Devices
- PC Card Hot Swap
- Wireless Modem Data Cards
- PC Cards
- Set-top-box
- Portable Music Players
- Gaming
- Storage Drives
