TPS2020D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 33mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2020 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 33m Ω |
| Drain to Source Resistance | 33mOhm |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2020D Overview
The package is in the form of a Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.This lighting drivere has a mounting type of Surface Mount.It owns General Purpose switch type.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Status Flag.This object belongs to the TPS2020 family.It consists of 8 terminations in total.In order to operate, 8 pins are used.There are 1 functions of the LED driver.It is possible to obtain high efficiency with a supply voltage of 3.3V.It is equipped with a total of 8 pins.Currently, the LED driving board has 33mOhm resistance.In this case, the output current is set to 200mA.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part has a power supply of 3/5V.The maximum input voltage of the LED driver is 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.
TPS2020D Features
Supplied from 3.3V
Resistance of 33mOhm
TPS2020D Applications
There are a lot of Texas Instruments TPS2020D Power Switches ICs applications.
- Handheld Devices
- PC Card Hot Swap
- Portable Video Game Players
- Hard Disk Drives
- Smartphone and PDA
- Hot-Swap Systems
- USB Power Distribution
- USB Ports/Hubs
- Portable/Handheld Devices
- Solid State Drivers
