TPS2020IDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2020 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2020IDRQ1 Overview
It is packaged in the form of a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.There is a default setting of 1 for output.The LED driving board is powered by a voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.As far as features are concerned, the LED driving board has Status Flag.It is a member of the TPS2020 family.It contains 8 terminations.The operation is performed through the 8 pins.It has 1 functions.As a result, the maximum output current is reduced to 200mA in order to meet the operation requirements.As long as the supply voltage is 3.3V, high efficiency can be achieved.This LED driver is equipped with a total of 8 pins.These electrical components are part of the Automotive, AEC-Q100 series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part is powered by 3/5V.A maximum input voltage of 5.5V volts can be applied to it.The minimum input voltage is 2.7V volts.
TPS2020IDRQ1 Features
Supplied from 3.3V
TPS2020IDRQ1 Applications
There are a lot of Texas Instruments TPS2020IDRQ1 Power Switches ICs applications.
- Portable GPS Device
- Portable Devices
- USB Power Distribution
- Portable GPS
- PDAs
- Portable Music Players
- Wireless/Networking Cards
- Gaming
- Hot Swap
- HDD and SSD
