TPS2020P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Current - Output (Max) | 200mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
TPS2020P Overview
As a result, it is packaged in the form of a Tube.There is a 8-DIP (0.300, 7.62mm) package that includes it.The lighting driver is mounted in the Through Hole position.General Purpose is the type of switch owned by it.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.A lighting driver with Status Flag features is available.A total of 8 terminations can be found in it.Currently, there are 1 functions associated with the lighting driver.In terms of output, the lighting driver can provide a maximum of 200mA V.A supply voltage of 3.3V leads to high efficiency.It is equipped with a total of 8 pins.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 2.7V.
TPS2020P Features
Supplied from 3.3V
TPS2020P Applications
There are a lot of Rochester Electronics, LLC TPS2020P Power Switches ICs applications.
- USB Ports/Hubs
- HDD and SSD
- USB Protection
- Portable Music Players
- PC Cards
- Solid State Drivers
- PC Card Hot Swap
- Storage (HDDs, SSDs)
- Hot Swap
- Wireless/Networking Cards
