TPS2021D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 33mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2021 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | N-Channel |
| Max Output Current | 600mA |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 33m Ω |
| Drain to Source Resistance | 33mOhm |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2021D Overview
Tube is the way it's packaged.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.It uses a supply voltage of Not Required to operate.Voltage output is N-Channel volts at maximum.This LED driving board is equipped with Status Flag features in order for it to be useful.This object belongs to the TPS2021 family.It has a total of 8 terminations.During operation, the 8 pins are used.There are 1 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 600mA.High efficiency is possible at 3.3V supply voltage.A total of 8 pins are present on it.Currently, the LED driving board has 33mOhm resistance.In this case, the output current is set to 600mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.A 3/5V power supply is used by the part.Voltage input is limited to 5.5V volts.The input voltage minimum is 2.7V volts.
TPS2021D Features
Supplied from 3.3V
Resistance of 33mOhm
TPS2021D Applications
There are a lot of Texas Instruments TPS2021D Power Switches ICs applications.
- Telecom and Network Systems
- Portable Video Game Players
- Solid State Drivers
- Portable/Handheld Devices
- Hot Swaps
- Set-top-box
- Hot Swap
- Storage Drives
- Wearable Devices
- PDAs
