TPS2021DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2021 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 600mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2021DG4 Overview
A Tube is used to package it.It's included in the 8-SOIC (0.154, 3.90mm Width) package.This lighting drivere has a mounting type of Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.There is a default setting of 1 for output.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.Features of the lighting driver are Status Flag.It belongs to the family TPS2021.A total of 8 terminations have been found in it.The operation is performed through the 8 pins.It contains 1 functions.In this case, the LED driving board can produce only 600mAV as its maximum output.It is possible to obtain high efficiency with a supply voltage of 3.3V.A total of 8 pins are included in this LED driver.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.3/5V is the power supply of the part.This LED driver can handle voltages up to 5.5V volts.Input voltage must be at least 2.7V volts.
TPS2021DG4 Features
Supplied from 3.3V
TPS2021DG4 Applications
There are a lot of Texas Instruments TPS2021DG4 Power Switches ICs applications.
- Portable Devices
- Handheld Devices
- HDD and SSD
- Solid State Drivers
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- PDAs
- Smart Phones, Feature Phones
- Gaming
- Wireless Headsets
