TPS2021DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2021 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 600mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2021DRG4 Overview
Tape & Reel (TR) is how it's packaged.Package 8-SOIC (0.154, 3.90mm Width) contains it.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.In terms of features, the LED driving board has Status Flag.It comes under the family of TPS2021.It has a total of 8 terminations.The 8 pins are used for the operation of the system.It consists of 1 functions.The maximum output of the LED driving board is 600mAV.High efficiency is possible at 3.3V supply voltage.A total of 8 pins are present on it.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part has a power supply of 3/5V.The maximum input voltage of the LED driver is 5.5V volts.The minimum input voltage is 2.7V volts.
TPS2021DRG4 Features
Supplied from 3.3V
TPS2021DRG4 Applications
There are a lot of Texas Instruments TPS2021DRG4 Power Switches ICs applications.
- Notebook PC
- Set-Top Boxes
- USB Power Distribution
- Set-top-box
- Portable Music Players
- Portable GPS Device
- Handheld Devices
- Wireless Modem Data Cards
- HDD, SSD
- Storage (HDDs, SSDs)
