TPS2021P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPS2021 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 600mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 μs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2021P Overview
It is packaged in the manner of a Tube.In the 8-DIP (0.300, 7.62mm) package, it is included.This LED driving board is mounted using the mounting type Through Hole.There is a switch type of General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.By default, it is set to output 1.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Status Flag.As you can see, it comes from the TPS2021 family.It has a total of 8 terminations.The operation is performed through the 8 pins.There are 1 functions of the LED driver.There is a maximum output of 600mAV from the LED driver.Supply voltages of 3.3V allow for high efficiency.In total, it has 8 pins.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.It has a power supply of 3/5V.This LED driving board can accept voltages up to 5.5V volts as an input.The input voltage minimum is 2.7V volts.
TPS2021P Features
Supplied from 3.3V
TPS2021P Applications
There are a lot of Texas Instruments TPS2021P Power Switches ICs applications.
- Portable Music Players
- Various applications equipped with buttons
- USB Protection
- PDAs
- Portable/Handheld Devices
- Set-top-box
- Hot Swaps
- Solid-State Drives
- HDD and SSD
- Notebook PC
