Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
33mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
725mW |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2022 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
5.8V |
Output Type |
N-Channel |
Max Output Current |
1A |
Power Supplies |
3/5V |
Interface |
On/Off |
Nominal Supply Current |
1A |
Output Configuration |
High Side |
Power Dissipation |
725mW |
Output Current |
1A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
20 ms |
Max Output Voltage |
5.8V |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
40 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Turn On Time |
20000 µs |
Output Peak Current Limit-Nom |
1.5A |
Rds On (Typ) |
33m Ω |
Drain to Source Resistance |
33mOhm |
Turn Off Time |
40000 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2022D Overview
Tube is how it's packaged.This file is included in package 8-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The lighting driver has a total of 1 outputs that are available for use.A voltage of Not Required is used to power it.It has a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.It comes under the family of TPS2022.It contains 8 terminations.For operation, we use the 8 pins.As far as functions are concerned, the lighting driver has 1.In order to meet the operation criteria, the maximum output current drops to 1A.The supply voltage of 3.3V is conducive to high efficiency.As a result, it has a total of 8 pins.It has a resistance of 33mOhm.In this case, the output current will be set to 1A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.A 3/5V power supply is used by the part.A maximum input voltage of 5.5V volts can be applied to it.It has a 2.7V volt minimum input voltage.
TPS2022D Features
Supplied from 3.3V
Resistance of 33mOhm
TPS2022D Applications
There are a lot of Texas Instruments TPS2022D Power Switches ICs applications.
- Wearable Devices
- Notebook and Tablet Computers
- PC Cards
- Hot Swap
- USB Power Distribution
- USB Protection
- Storage (HDDs, SSDs)
- Mobile Communication Devices
- Set-top-box
- USB3.1 Power Delivery