TPS2022DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2022 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2022DG4 Overview
It is packaged in the form of a Tube.This package is included in 8-SOIC (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Status Flag features.It is part of the TPS2022 family of LED drivers.It contains 8 terminations.The operation is carried out using the 8 pins.It has 1 functions.The lighting driver's maximum output is 1AV.It is possible to obtain high efficiency with a supply voltage of 3.3V.The LED driver has a total of 8 pins.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part has a power supply of 3/5V.Voltage input is limited to 5.5V volts.Input voltage must be at least 2.7V volts.
TPS2022DG4 Features
Supplied from 3.3V
TPS2022DG4 Applications
There are a lot of Texas Instruments TPS2022DG4 Power Switches ICs applications.
- Hot Swap
- Set-Top Boxes
- Set-top-box
- Portable/Handheld Devices
- USB Power Distribution
- Storage Drives
- Notebook PC
- HDD and SSD
- Solid-State Drives
- Gaming
