Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2022 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
1A |
Power Supplies |
3/5V |
Interface |
On/Off |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Input Characteristics |
STANDARD |
Voltage - Load |
2.7V~5.5V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Turn On Time |
20000 µs |
Output Peak Current Limit-Nom |
1.5A |
Rds On (Typ) |
33m Ω |
Turn Off Time |
40000 µs |
Built-in Protections |
OVER CURRENT; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SINK |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2022DRQ1 Overview
It is packaged in the form of a Tape & Reel (TR).It is included in the package 8-SOIC (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.There is a TPS2022 family of things that it belongs to.A total of 8 terminations can be found in it.It is necessary to use the 8 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.In total, it has 8 pins.This electrical component can be found in the Automotive, AEC-Q100 series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.It has a power supply of 3/5V.Its maximum input voltage is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.
TPS2022DRQ1 Features
Supplied from 3.3V
TPS2022DRQ1 Applications
There are a lot of Texas Instruments TPS2022DRQ1 Power Switches ICs applications.
- PC Cards
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- Hot Swaps
- Smartphone and PDA
- Storage Drives
- USB Power Distribution
- Set-top-box
- Wireless/Networking Cards
- USB3.1 Power Delivery