TPS2022P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2022 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2022P Overview
Tube is the way it's packaged.This package is included in 8-DIP (0.300, 7.62mm).The mounting type of the LED driver is Through Hole.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.As a default, the output is set to 1.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Features of the lighting driver are Status Flag.It comes under the family of TPS2022.A total of 8 terminations have been recorded.For operation, 8 pins are used.There are 1 functions of the LED driver.The LED driver output is limited to 1AV.High efficiency is possible when the supply voltage is set to 3.3V.The lighting driver is mounted in the way of Through Hole.There are 8 pins in total on this board.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The supply voltage (Vsup) should be kept above 2.7V for normal operation.There is a voltage supply of 3/5V volts on this part.
TPS2022P Features
Supplied from 3.3V
TPS2022P Applications
There are a lot of Texas Instruments TPS2022P Power Switches ICs applications.
- Wearable Devices
- HDD and SSD
- Hard Disk Drives
- Solid State Drivers
- Handheld Devices
- USB Ports/Hubs
- Portable Devices
- Wireless/Networking Cards
- PC Card Hot Swap
- Portable GPS Device
