TPS2023DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2023 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 2.2A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2023DR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 8-SOIC (0.154, 3.90mm Width).The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.It belongs to the TPS2023 family.The termination count is 8.It is necessary to use the 8 pins in order to operate the LED driver.As far as functions are concerned, the lighting driver has 1.This LED driver has a maximum output of 1.5AV.Supply voltages of 3.3V allow for high efficiency.It is equipped with a total of 8 pins.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The power supply of the part is 3/5V.Voltage input is limited to 5.5V volts.There is a minimum input voltage of 2.7V volts.
TPS2023DR Features
Supplied from 3.3V
TPS2023DR Applications
There are a lot of Texas Instruments TPS2023DR Power Switches ICs applications.
- Smart Phones, Feature Phones
- Wireless Headsets
- PDAs
- Hot Swap
- Wearable Devices
- Portable GPS Device
- Notebook PC
- Handheld Devices
- Various applications equipped with buttons
- Storage Drives
