TPS2023P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPS2023 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 μs |
| Output Peak Current Limit-Nom | 2.2A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2023P Overview
As you can see, it's packaged in the way of a Tube.There is a 8-DIP (0.300, 7.62mm) package that includes it.This lighting drivere has a mounting type of Through Hole.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of N-Channel volts is available from the output of this LED driver.In terms of features, the LED driving board has Status Flag.It comes under the family of TPS2023.A total of 8 terminations have been found in it.The 8 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.This lighting driver is capable of delivering a maximum output of 1.5A volts.The supply voltage of 3.3V is conducive to high efficiency.As a result, it has a total of 8 pins.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.3/5V is the power supply of the part.Its maximum input voltage is 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.
TPS2023P Features
Supplied from 3.3V
TPS2023P Applications
There are a lot of Texas Instruments TPS2023P Power Switches ICs applications.
- PC Card Hot Swap
- HDD and SSD
- Portable GPS
- Hot Swap
- Smartphone and PDA
- Hot Swap
- Storage (HDDs, SSDs)
- PC Cards
- Notebook and Tablet Computers
- Portable Devices
