TPS2024IDRG4Q1
| Parameters | |
|---|---|
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 37mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2024 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
TPS2024IDRG4Q1 Overview
Tape & Reel (TR) is how it's packaged.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.The lighting driver is mounted in the Surface Mount position.This switch is of type General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.There are Status Flag features available on the LED driving board.It comes under the family of TPS2024.There are 8 terminations in it.The 8 pins are used for the operation of the system.It has 1 functions.This operation requires the maximum output current to be decreased to 2A.As long as the supply voltage is 3.3V, high efficiency can be achieved.The LED driving board is equipped with a total of 8 pins.37mOhm resistance is present in the lighting driver.It is part of the Automotive, AEC-Q100 series.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.Normal operation requires a voltage above 2.7V for the supply voltage.This part has a power supply of 3/5V.A maximum input voltage of 5.5V volts can be applied to it.Input voltage must be at least 4.5V volts.
TPS2024IDRG4Q1 Features
Supplied from 3.3V
Resistance of 37mOhm
TPS2024IDRG4Q1 Applications
There are a lot of Texas Instruments TPS2024IDRG4Q1 Power Switches ICs applications.
- Set-top-box
- USB Power Distribution
- Wireless Headsets
- Notebook PC
- Hot Swap
- Portable GPS Device
- USB Protection
- USB Ports/Hubs
- Various applications equipped with buttons
- Portable GPS
