TPS2024IDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 14 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 37mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2024 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2024IDRQ1 Overview
It is packaged in the form of a Cut Tape (CT).This file is included in package 8-SOIC (0.154, 3.90mm Width).The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.As a default, the output is set to 1.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.It comes under the family of TPS2024.It consists of 8 terminations in total.8 pins are used for operation.The LED driver has 1 functions.This results in the maximum output current dropping to 2A to meet the operation criteria.With a supply voltage of 3.3V, high efficiency is possible.A total of 8 pins are present on it.The LED driver has 37mOhm resistance.This electrical component is included in the Automotive, AEC-Q100 series.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In this part, the power supply is set to 3/5V.It has a maximum input voltage of 5.5V volts.It has a 2.7V volt minimum input voltage.
TPS2024IDRQ1 Features
Supplied from 3.3V
Resistance of 37mOhm
TPS2024IDRQ1 Applications
There are a lot of Texas Instruments TPS2024IDRQ1 Power Switches ICs applications.
- PDAs
- USB Power Distribution
- Portable Video Game Players
- Smartphone and PDA
- Portable GPS
- Notebook PC
- Storage Drives
- USB Ports/Hubs
- Mobile Communication Devices
- Handheld Devices
