TPS2030D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 33mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2030 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 33m Ω |
| Drain to Source Resistance | 33mOhm |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2030D Overview
It is packaged in the manner of a Tube.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.It has a total of Status Flag features.This object belongs to the TPS2030 family.As a result, there are 8 terminations.For operation, we use the 8 pins.There are 1 functions of the LED driver.As long as the supply voltage is 3.3V, high efficiency can be achieved.The LED driving board is equipped with a total of 8 pins.Currently, the LED driving board has 33mOhm resistance.As a result, the output current is set to 200mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In this case, the power supply is 3/5V.Voltage input is limited to 5.5V volts.Input voltage must be at least 2.7V volts.
TPS2030D Features
Supplied from 3.3V
Resistance of 33mOhm
TPS2030D Applications
There are a lot of Texas Instruments TPS2030D Power Switches ICs applications.
- Portable GPS Device
- Various applications equipped with buttons
- Wireless/Networking Cards
- Mobile Communication Devices
- Wearable Devices
- Hot Swaps
- Portable Music Players
- HDD and SSD
- PDAs
- Portable Video Game Players
