banner_page

TPS2030DRG4

3/5V N-Channel PMIC TPS2030 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2030DRG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 814
  • Description: 3/5V N-Channel PMIC TPS2030 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
JESD-609 Code e4
Feature Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Technology MOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number TPS2030
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Power Supplies 3/5V
Interface On/Off
Current - Output (Max) 200mA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Turn On Time 20000 µs
Output Peak Current Limit-Nom 0.3A
Rds On (Typ) 33m Ω
Turn Off Time 40000 µs
Built-in Protections OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SOURCE
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)

TPS2030DRG4 Overview


The package is in the form of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Status Flag features.The TPS2030 family consists of this type.A total of 8 terminations can be found in it.It is necessary to use the 8 pins in order to operate the LED driver.It contains 1 functions.The LED driver output is limited to 200mAV.Using a voltage of 3.3V allows for high efficiency.8 pins are equipped with it.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In this case, the power supply is 3/5V.Its maximum input voltage is 5.5V volts.The input voltage minimum is 2.7V volts.

TPS2030DRG4 Features


Supplied from 3.3V

TPS2030DRG4 Applications


There are a lot of Texas Instruments TPS2030DRG4 Power Switches ICs applications.

  • Hot-Swap Systems
  • Portable/Handheld Devices
  • Handheld Devices
  • USB3.1 Power Delivery
  • Portable GPS
  • USB Power Distribution
  • HDD and SSD
  • USB Ports/Hubs
  • PC Cards
  • USB Power Distribution

Write a review

Note: HTML is not translated!
    Bad           Good