TPS2030IDRG4Q1
| Parameters | |
|---|---|
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2030 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
TPS2030IDRG4Q1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package includes it.A Surface Mount mounting is used for the LED driving board.The switch type is General Purpose.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.There is a default setting of 1 for output.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.The lighting driver has Status Flag features.It belongs to the family TPS2030.A total of 8 terminations have been found in it.In order to operate, the 8 pins are used.It is important to note that the LED driving board has 1 functions.It is necessary to reduce the maximum output current to 200mA to meet the operation criteria.Supply voltages of 3.3V allow for high efficiency.There are 8 pins in total on this board.It belongs to the Automotive, AEC-Q100 series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.This part has a power supply of 3/5V.Input voltage is limited to 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.
TPS2030IDRG4Q1 Features
Supplied from 3.3V
TPS2030IDRG4Q1 Applications
There are a lot of Texas Instruments TPS2030IDRG4Q1 Power Switches ICs applications.
- Hot Swap
- Set-Top Boxes
- Wireless Headsets
- USB Protection
- Storage (HDDs, SSDs)
- Portable Devices
- Storage Drives
- USB Power Distribution
- Various applications equipped with buttons
- Set-top-box
