TPS2030P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPS2030 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 200mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 μs |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2030P Overview
A Tube is used to package it.It's included in the 8-DIP (0.300, 7.62mm) package.The LED driver is mounted as Through Hole.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Status Flag features.It is part of the TPS2030 family of LED drivers.It consists of 8 terminations in total.The 8 pins are used to operate the LED driver.As far as functions are concerned, the lighting driver has 1.This lighting driver is capable of delivering a maximum output of 200mA volts.A supply voltage of 3.3V leads to high efficiency.8 pins are equipped with it.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.This part is powered by 3/5V.This LED driver can handle voltages up to 5.5V volts.Input voltage must be at least 2.7V volts.
TPS2030P Features
Supplied from 3.3V
TPS2030P Applications
There are a lot of Texas Instruments TPS2030P Power Switches ICs applications.
- Storage Drives
- Handheld Devices
- Portable/Handheld Devices
- Telecom and Network Systems
- Mobile Communication Devices
- Set-top-box
- Hot Swap
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- Set-Top Boxes
