Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
33mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
725mW |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2031 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
5.8V |
Output Type |
N-Channel |
Power Supplies |
3/5V |
Interface |
On/Off |
Output Configuration |
High Side |
Output Current |
600mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Input Characteristics |
STANDARD |
Voltage - Load |
2.7V~5.5V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Turn On Time |
20000 µs |
Output Peak Current Limit-Nom |
0.9A |
Rds On (Typ) |
33m Ω |
Drain to Source Resistance |
33mOhm |
Turn Off Time |
40000 µs |
Built-in Protections |
OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2031D Overview
The LED driver's packaged as a Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.There are 1 outputs available on this lighting driver.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.It belongs to the TPS2031 family.The termination count is 8.The operation is carried out using the 8 pins.It is important to note that the LED driving board has 1 functions.A supply voltage of 3.3V leads to high efficiency.There are 8 pins in total on this board.In this LED driving board, there is 33mOhm resistance.The output current is set to 600mA in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The power supply of the part is 3/5V.As far as input voltage goes, its maximum is 5.5V volts.There is a minimum input voltage of 2.7V volts.
TPS2031D Features
Supplied from 3.3V
Resistance of 33mOhm
TPS2031D Applications
There are a lot of Texas Instruments TPS2031D Power Switches ICs applications.
- Storage Drives
- Wireless/Networking Cards
- Wireless Headsets
- HDD and SSD
- PC Cards
- Hot Swaps
- Mobile Communication Devices
- PC Card Hot Swap
- USB Power Distribution
- Wearable Devices