TPS2031DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2031 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 600mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2031DG4 Overview
It is package in Tube case.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.A lighting driver with Status Flag features is available.It belongs to the family TPS2031.A total of 8 terminations have been recorded.It is necessary to use the 8 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.The lighting driver's maximum output is 600mAV.The supply voltage of 3.3V is conducive to high efficiency.A total of 8 pins are present on it.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this part, the power supply is set to 3/5V.It has a maximum input voltage of 5.5V volts.It has a 2.7V volt minimum input voltage.
TPS2031DG4 Features
Supplied from 3.3V
TPS2031DG4 Applications
There are a lot of Texas Instruments TPS2031DG4 Power Switches ICs applications.
- Notebook and Tablet Computers
- Low Voltage I/O System Power
- Hot Swap
- USB Ports/Hubs
- Solid State Drivers
- USB Protection
- Various applications equipped with buttons
- Hot Swap
- Handheld Devices
- Gaming
