TPS2031P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TPS2031 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 600mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 μs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2031P Overview
The package is in the form of a Tube.The 8-DIP (0.300, 7.62mm) package contains it.The mounting type of the LED driver is Through Hole.It owns the General Purpose switch type.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.There is a default setting of 1 for output.It uses a supply voltage of Not Required to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Status Flag features.This object belongs to the TPS2031 family.A total of 8 terminations can be found in it.During operation, the 8 pins are used.Currently, the lighting driver has a total of 1 functions.The maximum output of the LED driving board is 600mAV.It is possible to obtain high efficiency with a supply voltage of 3.3V.8 pins are equipped with it.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part's power supply is 3/5V.As far as input voltage goes, its maximum is 5.5V volts.It has a 2.7V volt minimum input voltage.
TPS2031P Features
Supplied from 3.3V
TPS2031P Applications
There are a lot of Texas Instruments TPS2031P Power Switches ICs applications.
- USB Ports/Hubs
- Smart Phones, Feature Phones
- Telecom and Network Systems
- Storage Drives
- PC Card Hot Swap
- Notebook PC
- Hot-Swap Systems
- Portable/Handheld Devices
- Solid State Drivers
- Hard Disk Drives
