TPS2032D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 19 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 33mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2032 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2032D Overview
As a result, it is packaged in the form of a Tube.The 8-SOIC (0.154, 3.90mm Width) package contains it.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.In terms of features, the LED driving board has Status Flag.It belongs to the TPS2032 family.It contains 8 terminations.For operation, 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.This LED driver is equipped with a total of 8 pins.In this case, there is 33mOhm resistance in the LED driving board.It is set to 1A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.This part has a power supply of 3/5V.There is a maximum input voltage of 5.5V volts.Input voltage must be at least 2.7V volts.
TPS2032D Features
Supplied from 3.3V
Resistance of 33mOhm
TPS2032D Applications
There are a lot of Texas Instruments TPS2032D Power Switches ICs applications.
- USB Power Distribution
- Solid-State Drives
- Gaming
- Notebook and Tablet Computers
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Various applications equipped with buttons
- HDD, SSD
- Hot-Swap Systems
- Portable GPS Device
