TPS2032QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS2032 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2032QDRQ1 Overview
Tape & Reel (TR) is the way it's packaged.This file is included in package 8-SOIC (0.154, 3.90mm Width).The LED driver is mounted as Surface Mount.This switch is of type General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.There is a default setting of 1 for output.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is N-Channel volts.It has a total of Status Flag features.It belongs to the family TPS2032.It has a total of 8 terminations.The 8 pins are used to operate the LED driver.This results in the maximum output current dropping to 1A to meet the operation criteria.As a result, it has a total of 8 pins.There is an electrical component included in the Automotive, AEC-Q100 series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In this case, the power supply is 3/5V.This LED driver can handle voltages up to 5.5V volts.It has a 2.7V volt minimum input voltage.
TPS2032QDRQ1 Features
TPS2032QDRQ1 Applications
There are a lot of Texas Instruments TPS2032QDRQ1 Power Switches ICs applications.
- Portable Devices
- USB Protection
- Wearable Devices
- Hot Swap
- Wireless Modem Data Cards
- Telecom and Network Systems
- PDAs
- Mobile Communication Devices
- USB Ports/Hubs
- PC Cards
