TPS2033DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2033 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 2.2A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2033DRG4 Overview
The LED driver's packaged as a Tape & Reel (TR).In the 8-SOIC (0.154, 3.90mm Width) package, it is included.The mounting type of the LED driver is Surface Mount.A General Purpose switch type is owned by it.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The LED driver is equipped with 1 outputs.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.It is equipped with Status Flag features.This object belongs to the TPS2033 family.It contains 8 terminations.For operation, we use the 8 pins.The LED driving board has a total of 1 functions.The lighting driver's maximum output is 1.5AV.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.The LED driver has a total of 8 pins.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.This part's power supply is 3/5V.It has a maximum input voltage of 5.5V volts.It requires 4.5V volts as the minimum input voltage.
TPS2033DRG4 Features
Supplied from 3.3V
TPS2033DRG4 Applications
There are a lot of Texas Instruments TPS2033DRG4 Power Switches ICs applications.
- HDD and SSD
- Wireless Modem Data Cards
- Hard Disk Drives
- Wireless Headsets
- Solid-State Drives
- Portable Devices
- Smart Phones, Feature Phones
- USB Power Distribution
- USB Protection
- Various applications equipped with buttons
