banner_page

TPS2033P

3/5V N-Channel 2.54mm PMIC TPS2033 8 Pin 3.3V 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2033P
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 837
  • Description: 3/5V N-Channel 2.54mm PMIC TPS2033 8 Pin 3.3V 8-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Weight 440.409842mg
Operating Temperature -40°C~125°C TJ
Packaging Tube
Feature Status Flag
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Peripheral Drivers
Technology MOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number TPS2033
Pin Count 8
Number of Outputs 1
Qualification Status Not Qualified
Output Type N-Channel
Power Supplies 3/5V
Supply Voltage-Min (Vsup) 2.7V
Interface On/Off
Current - Output (Max) 1.5A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Turn On Time 20000 µs
Output Peak Current Limit-Nom 2.2A
Rds On (Typ) 33m Ω
Turn Off Time 40000 µs
Built-in Protections OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SOURCE
Width 7.62mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2033P Overview


It is package in Tube case.This file is included in package 8-DIP (0.300, 7.62mm).The lighting driver has the mounting type Through Hole.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.There are 1 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Status Flag features.This object belongs to the TPS2033 family.There are 8 terminations in it.The 8 pins are used for the operation of the system.The LED driver has 1 functions.1.5AV is the maximum output of the LED driver.A supply voltage of 3.3V leads to high efficiency.Through Hole is mounted in the way.8 pins are connected to it in total.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.Normal operation requires a voltage above 2.7V for the supply voltage.This part has a power supply of 3/5V volts.

TPS2033P Features


Supplied from 3.3V

TPS2033P Applications


There are a lot of Texas Instruments TPS2033P Power Switches ICs applications.

  • Storage (HDDs, SSDs)
  • Hot-Swap Systems
  • Hard Disk Drives
  • Handheld Devices
  • Notebook and Tablet Computers
  • Gaming
  • Portable Music Players
  • Set-top-box
  • Portable GPS Device
  • PDAs

Write a review

Note: HTML is not translated!
    Bad           Good