banner_page

TPS2034D

3/5V N-Channel PMIC TPS2034 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2034D
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 140
  • Description: 3/5V N-Channel PMIC TPS2034 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 20 hours ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~125°C TJ
Packaging Tube
JESD-609 Code e4
Feature Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Termination SMD/SMT
ECCN Code EAR99
Resistance 33mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Max Power Dissipation 725mW
Technology MOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number TPS2034
Pin Count 8
Number of Outputs 1
Output Voltage 5.8V
Output Type N-Channel
Max Output Current 2A
Power Supplies 3/5V
Interface On/Off
Output Configuration High Side
Power Dissipation 725mW
Output Current 2A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Input Characteristics STANDARD
Voltage - Load 2.7V~5.5V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Turn On Time 20000 µs
Output Peak Current Limit-Nom 3A
Rds On (Typ) 33m Ω
Turn Off Time 40000 µs
Built-in Protections OVER CURRENT; THERMAL; UNDER VOLTAGE
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2034D Overview


A Tube is used to package it.It's included in the 8-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The lighting driver has a total of 1 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.Voltage output is N-Channel volts at maximum.There are Status Flag features available on the LED driving board.As you can see, it comes from the TPS2034 family.It contains 8 terminations.For operation, 8 pins are used.It has 1 functions.Maximum output current falls to 2A when operation criteria are met.It is possible to obtain high efficiency with a supply voltage of 3.3V.8 pins are equipped with it.33mOhm is the resistance of the lighting driver.In this case, the output current is set to 2A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 3/5V volts.Its maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.7V volts.

TPS2034D Features


Supplied from 3.3V
Resistance of 33mOhm

TPS2034D Applications


There are a lot of Texas Instruments TPS2034D Power Switches ICs applications.

  • Portable Devices
  • Mobile Communication Devices
  • Telecom and Network Systems
  • Portable/Handheld Devices
  • Portable GPS
  • Low Voltage I/O System Power
  • Portable Music Players
  • Wireless Modem Data Cards
  • USB3.1 Power Delivery
  • Hot-Swap Systems

Write a review

Note: HTML is not translated!
    Bad           Good