Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
725mW |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2034 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Power Supplies |
3/5V |
Interface |
On/Off |
Current - Output (Max) |
2A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Input Characteristics |
STANDARD |
Voltage - Load |
2.7V~5.5V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Turn On Time |
20000 µs |
Output Peak Current Limit-Nom |
3A |
Rds On (Typ) |
33m Ω |
Turn Off Time |
40000 µs |
Built-in Protections |
OVER CURRENT; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SOURCE |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2034DG4 Overview
As you can see, it's packaged in the way of a Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The LED driver has 1 outputs.A supply voltage of Not Required is required for it to operate.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Status Flag.This object belongs to the TPS2034 family.It contains 8 terminations.The 8 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.From the lighting driver, there is a maximum output of 2AV.High efficiency is possible when the supply voltage is set to 3.3V.The LED driving board is equipped with a total of 8 pins.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this case, the power supply is 3/5V.As far as input voltage goes, its maximum is 5.5V volts.The minimum input voltage is 2.7V volts.
TPS2034DG4 Features
Supplied from 3.3V
TPS2034DG4 Applications
There are a lot of Texas Instruments TPS2034DG4 Power Switches ICs applications.
- USB Power Distribution
- Low Voltage I/O System Power
- Handheld Devices
- Smartphone and PDA
- Portable GPS Device
- Portable/Handheld Devices
- Wireless Headsets
- Solid-State Drives
- PC Card Hot Swap
- Smart Phones, Feature Phones