banner_page

TPS2034P

3/5V N-Channel 2.54mm PMIC TPS2034 8 Pin 3.3V 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2034P
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 958
  • Description: 3/5V N-Channel 2.54mm PMIC TPS2034 8 Pin 3.3V 8-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Weight 440.409842mg
Operating Temperature -40°C~125°C TJ
Packaging Tube
JESD-609 Code e4
Feature Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Technology MOS
Terminal Position DUAL
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 2.54mm
Base Part Number TPS2034
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Power Supplies 3/5V
Interface On/Off
Current - Output (Max) 2A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Input Characteristics STANDARD
Voltage - Load 2.7V~5.5V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Turn On Time 20000 µs
Output Peak Current Limit-Nom 3A
Rds On (Typ) 33m Ω
Turn Off Time 40000 µs
Built-in Protections OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SOURCE
Height 5.08mm
Length 9.81mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Through Hole

TPS2034P Overview


It is packaged in the form of a Tube.It's included in the 8-DIP (0.300, 7.62mm) package.This lighting drivere has a mounting type of Through Hole.This switch is of type General Purpose.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.There are Status Flag features available on the LED driving board.It comes under the family of TPS2034.It contains 8 terminations.For operation, we use the 8 pins.It is important to note that the LED driving board has 1 functions.In terms of output, the lighting driver can provide a maximum of 2A V.The supply voltage can be 3.3V for high efficiency.The LED driving board is equipped with a total of 8 pins.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.There is a voltage supply of 3/5V volts on this part.There is a maximum input voltage of 5.5V volts.As a minimum input voltage, it requires 2.7V volts.

TPS2034P Features


Supplied from 3.3V

TPS2034P Applications


There are a lot of Texas Instruments TPS2034P Power Switches ICs applications.

  • Portable/Handheld Devices
  • Hard Disk Drives
  • Solid State Drivers
  • USB Protection
  • Low Voltage I/O System Power
  • Notebook PC
  • Wireless Modem Data Cards
  • PC Cards
  • Storage Drives
  • HDD and SSD

Write a review

Note: HTML is not translated!
    Bad           Good