TPS2041AD
| Parameters | |
|---|---|
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2041 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6.3V |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
TPS2041AD Overview
It's?packaged?in?the way?of?a?Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.Ensure reliable operation by setting the temperature to 0°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.It has a total of Status Flag features.I believe it belongs to the TPS2041 family.As a result, there are 8 terminations.In order to operate, the 8 pins are used.As far as functions are concerned, the lighting driver has 1.High efficiency is possible when the supply voltage is set to 3.3V.As a result, it is mounted in the manner of Surface Mount.8 pins are equipped with it.There is 80mOhm resistance on the LED driver.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.You can select from 1 channels.The maximum input voltage of the LED driver is 5.5V volts.Input voltage must be at least 2.7V volts.
TPS2041AD Features
Supplied from 3.3V
Resistance of 80mOhm
1 channels
TPS2041AD Applications
There are a lot of Texas Instruments TPS2041AD Power Switches ICs applications.
- Hard Disk Drives
- Portable Devices
- Hot Swap
- Portable GPS Device
- PC Cards
- Wireless Modem Data Cards
- USB3.1 Power Delivery
- Hot-Swap Systems
- Hot Swaps
- PDAs
