TPS2041ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2041 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2041ADR Overview
Tape & Reel (TR) is how it's packaged.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.It is recommended that the temperature be set to 0°C~125°C TJ for reliable operation.The lighting driver has a total of 1 outputs that are available for use.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.The lighting driver has Status Flag features.It belongs to the TPS2041 family.As a result, there are 8 terminations.For operation, 8 pins are used.There are 1 functions of the LED driver.In terms of output, the lighting driver can provide a maximum of 500mA V.Supply voltages of 3.3V allow for high efficiency.This lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 8 pins.A maximum supply voltage of 5.5V is set in Vsup.In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 1.
TPS2041ADR Features
Supplied from 3.3V
1 channels
TPS2041ADR Applications
There are a lot of Texas Instruments TPS2041ADR Power Switches ICs applications.
- Wireless/Networking Cards
- Portable GPS Device
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
- USB Power Distribution
- USB Power Distribution
- Wearable Devices
- Hot Swap
- Storage (HDDs, SSDs)
- HDD, SSD
