Parameters |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
70mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
UNDERVOLTAGE LOCKOUT |
Max Power Dissipation |
585.82mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2041 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
6V |
Output Type |
N-Channel |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Output Configuration |
High Side |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.07mA |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
70m Ω |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
TPS2041BD Overview
As you can see, it's packaged in the way of a Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.There are Status Flag features available on the LED driving board.The TPS2041 family contains this object.The termination count is 8.The 8 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.It is possible to obtain high efficiency with a supply voltage of 3.3V.A total of 8 pins are present on it.In this case, there is 70mOhm resistance in the LED driving board.In this case, the output current is set to 500mA.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.The maximum input voltage is 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.UNDERVOLTAGE LOCKOUT can also be produced by using this LED driver.Operation requires 0.07mA supply current.
TPS2041BD Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2041BD Applications
There are a lot of Texas Instruments TPS2041BD Power Switches ICs applications.
- PC Cards
- Wireless/Networking Cards
- HDD, SSD
- Smartphone and PDA
- USB Power Distribution
- Low Voltage I/O System Power
- USB3.1 Power Delivery
- Telecom and Network Systems
- Hot-Swap Systems
- Notebook PC