TPS2041BDBVT
| Parameters | |
|---|---|
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 95m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 285mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2041 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.3A |
| Number of Channels | 1 |
TPS2041BDBVT Overview
It is package in Tape & Reel (TR) case.It is included with the SC-74A, SOT-753 package as well.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver is equipped with 1 outputs.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Status Flag features.It comes under the family of TPS2041.The termination count is 5.The operation is performed through the 5 pins.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 500mAV.This results in the maximum output current dropping to 1.3A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.In this case, it is mounted in the way of Surface Mount.A total of 5 pins are present on it.In this case, there is 140mOhm resistance in the LED driving board.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.As far as input voltage goes, its maximum is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.As well as producing UNDERVOLTAGE LOCKOUT, this LED driving board is capable of producing [1].Operation requires 0.07mA supply current.
TPS2041BDBVT Features
Supplied from 3.3V
Resistance of 140mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2041BDBVT Applications
There are a lot of Texas Instruments TPS2041BDBVT Power Switches ICs applications.
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- USB Power Distribution
- Wireless Headsets
- Hot Swaps
- Portable GPS Device
- Hard Disk Drives
- USB Protection
- USB Power Distribution
- Mobile Communication Devices
