TPS2041BDBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 285mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2041 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 95m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2041BDBVTG4 Overview
The LED driver's packaged as a Tape & Reel (TR).This package is included in SC-74A, SOT-753.Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver has 1 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts has been specified.Currently, the LED driving board is equipped with Status Flag features.It belongs to the TPS2041 family.A total of 5 terminations have been found in it.The operation is carried out using the 5 pins.The LED driver has 1 functions.The maximum output current drops to 500mA in order to meet the operation criteria.Using a voltage of 3.3V allows for high efficiency.It is positioned in the direction of Surface Mount.A total of 5 pins are included in this LED driver.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.In total, 1 channels are available.The maximum input voltage is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.As a result of using this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.The maximum supply current for the LED driver is 0.07mA when it is operating.
TPS2041BDBVTG4 Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2041BDBVTG4 Applications
There are a lot of Texas Instruments TPS2041BDBVTG4 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Hot-Swap Systems
- Notebook and Tablet Computers
- HDD and SSD
- USB Ports/Hubs
- Various applications equipped with buttons
- Hard Disk Drives
- Solid State Drivers
- Low Voltage I/O System Power
- Gaming
