TPS2041BDGNG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 1.7123W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2041 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2041BDGNG4 Overview
A Tube is used to package it.It's included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.As a default, the output is set to 1.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.There are Status Flag features available on the LED driving board.It belongs to the TPS2041 family.As a result, there are 8 terminations.For operation, 8 pins are used.The LED driver has 1 functions.The lighting driver's maximum output is 500mAV.A supply voltage of 3.3V leads to high efficiency.Surface Mount is mounted in the way of this lighting driver.In total, it has 8 pins.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.It has a maximum input voltage of 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.Through the use of this lighting driver, we can also produce UNDERVOLTAGE LOCKOUT.In order to operate at its maximum capacity, the supply current must not exceed 0.07mA.
TPS2041BDGNG4 Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2041BDGNG4 Applications
There are a lot of Texas Instruments TPS2041BDGNG4 Power Switches ICs applications.
- Set-Top Boxes
- Portable Music Players
- Various applications equipped with buttons
- Smartphone and PDA
- Hard Disk Drives
- Wearable Devices
- Hot Swap
- HDD and SSD
- Storage Drives
- Solid-State Drives
