TPS2041BDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2041 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2041BDGNR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts has been specified.The lighting driver has Status Flag features.I believe it belongs to the TPS2041 family.In total, there are 8 terminations.The 8 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.This results in the maximum output current dropping to 500mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.The lighting driver is mounted in the way of Surface Mount.A total of 8 pins are present on it.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7V.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.A total of 1 channels are available for you to choose from.By using this lighting driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.For operation, it has a maximum supply current of 0.07mA.
TPS2041BDGNR Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2041BDGNR Applications
There are a lot of Texas Instruments TPS2041BDGNR Power Switches ICs applications.
- USB Ports/Hubs
- Notebook PC
- PDAs
- Wireless/Networking Cards
- Portable/Handheld Devices
- Solid-State Drives
- Various applications equipped with buttons
- Smart Phones, Feature Phones
- Notebook and Tablet Computers
- USB3.1 Power Delivery
