Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
135mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
UNDERVOLTAGE LOCKOUT |
Max Power Dissipation |
585.82mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2041 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Current - Output (Max) |
500mA |
Nominal Supply Current |
43μA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Turn On Delay Time |
3 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.07mA |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
10 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
70m Ω |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2041BDR Overview
It is packaged in the form of a Tape & Reel (TR).This file is included in package 8-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.As a default, the output is set to 1.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.This object belongs to the TPS2041 family.A total of 8 terminations have been found in it.During operation, the 8 pins are used.It consists of 1 functions.From the lighting driver, there is a maximum output of 500mAV.The supply voltage of 3.3V is conducive to high efficiency.8 pins are equipped with it.135mOhm is the resistance of the lighting driver.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.Voltage input is limited to 5.5V volts.The input voltage minimum is 2.7V volts.With the help of this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.In order to operate at its maximum capacity, the supply current must not exceed 0.07mA.
TPS2041BDR Features
Supplied from 3.3V
Resistance of 135mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2041BDR Applications
There are a lot of Texas Instruments TPS2041BDR Power Switches ICs applications.
- Portable Music Players
- Hard Disk Drives
- USB Ports/Hubs
- Wireless Headsets
- Storage Drives
- PC Card Hot Swap
- Solid-State Drives
- Portable/Handheld Devices
- Notebook PC
- Hot Swaps