banner_page

TPS2041BDRG4

N-Channel PMIC TPS2041 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2041BDRG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 276
  • Description: N-Channel PMIC TPS2041 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Supply Current-Max (Isup) 0.07mA
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ) 70m Ω
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Feature Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature UNDERVOLTAGE LOCKOUT
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number TPS2041
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Current - Output (Max) 500mA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting

TPS2041BDRG4 Overview


It is packaged in the manner of a Tape & Reel (TR).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Status Flag features is available.It belongs to the family TPS2041.It consists of 8 terminations in total.8 pins are used for operation.The LED driving board has a total of 1 functions.In this case, the LED driving board can produce only 500mAV as its maximum output.With a supply voltage of 3.3V, high efficiency is possible.It is equipped with a total of 8 pins.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.This LED driver can handle voltages up to 5.5V volts.The minimum input voltage is 2.7V volts.This LED driver can also produce UNDERVOLTAGE LOCKOUT.In order to operate, it requires at most 0.07mA amps of supply current.

TPS2041BDRG4 Features


Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT

TPS2041BDRG4 Applications


There are a lot of Texas Instruments TPS2041BDRG4 Power Switches ICs applications.

  • Smartphone and PDA
  • Low Voltage I/O System Power
  • Wearable Devices
  • Smart Phones, Feature Phones
  • Telecom and Network Systems
  • Notebook PC
  • Portable GPS
  • Handheld Devices
  • Portable Music Players
  • PC Cards

Write a review

Note: HTML is not translated!
    Bad           Good