Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-55°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
70mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Power Dissipation |
182mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2041 |
Pin Count |
5 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
500mA |
Supply Voltage-Min (Vsup) |
2.7V |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Nominal Supply Current |
1.55A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Supply Current-Max (Isup) |
0.07mA |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
70m Ω |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2041BMDBVTEP Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the SC-74A, SOT-753 package.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -55°C~125°C TJ.By default, it is set to output 1.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.A lighting driver with Status Flag features is available.It belongs to the TPS2041 family.A total of 5 terminations have been found in it.It is necessary to use the 5 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 500mA to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.Surface Mount is mounted in the way of this LED driving board.5 pins are equipped with it.70mOhm is the resistance of the lighting driver.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.7V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 1 channels to choose from.For operation, it has a maximum supply current of 0.07mA.
TPS2041BMDBVTEP Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
TPS2041BMDBVTEP Applications
There are a lot of Texas Instruments TPS2041BMDBVTEP Power Switches ICs applications.
- Solid State Drivers
- Set-Top Boxes
- Handheld Devices
- USB Ports/Hubs
- Portable/Handheld Devices
- Hot-Swap Systems
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Solid-State Drives
- HDD and SSD